IHammerdriver yemfumba
IParameter yeMveliso
ISHEETHI & UMbhobho(TUBE)VIBRO PILE HAMMER
| Imodeli &Iparamitha | ||||||
| Into | Iyunithi | HM-PD150 | HM-PD250 | HM-PD350 | HM-PD400 | HM-PD450 |
| Umzuzu we-Eccentric | Nm | 3.2 | 5.1/5.7 | 7.1 | 9.2 | 11 |
| Isantya sokujikeleza | rpm | 2600 | 2600 | 2600 | 2600 | 2600 |
| Amandla e-Centrifugal | KN | 24 | 38/42 | 52 | 68 | 81 |
| Uxinzelelo lokusebenza | Ibha | 200 | 300 | 320 | 330 | 330 |
| Ukuhamba kwe-oyile(min) | L/min | 100 | 163 | 220 | 260 | 300 |
| Ubunzima bomzimba obungundoqo | Itoni | 1.2 | 1.6 | 2.4 | 2.5 | 2.6 |
| Suit excavator | Itoni | 8~12 | 20–25 | 25~35 | 35~45 | 40~55 |
| Ubunzima bokubamba | kg | C15–450 | C16–548 | |||
| I-Extension boom | kg | A200–700 | A250–800 | |||
IHAMMERA YOKUBAMBA VIBROPILE
| Into | Iyunithi | SPD40 | SPD60 | SPD70 |
| Ubunzima bubonke | kg | 2600 | 3400 | 3500 |
| Ubude(L) | mm | 1350 | 1600 | 1600 |
| Ubude(H) | mm | 2410 | 2610 | 2610 |
| Ububanzi(W) | mm | 1050 | 1280 | 1280 |
| Umgama wokubamba (S) | mm | 250 | 250 | 250 |
| Bamba i-engile evulekileyo | ° | 30 | 30 | 30 |
| Amandla okubamba | kN | 500 | 500 | 500 |
| Umzuzu we-Eccentric | kgm | 4.9 | 6.8 | 8.9 |
| Suit excavator | Itoni | 20 | 30 | 40 |
Iprojekthi
-
IBhakethi yokuHlola01
-
IBhakethi yokuHlola02
-
IBhakethi yokuHlola03
-
Ukuhlola iBhakethi04
-
IBhakethi yokuHlola05
-
IBhakethi yokuHlola06
I-VIBRO PILE HAMMER INGASETYENZISWA KWIMIHLABA EYAHLUKILEYO
Isetyenziselwa ukuqinisa isiseko, qinisekisa ukuzinza kunye nokhuseleko lwesakhiwo.
Ulwakhiwo lwesiseko semfumba: ukushukuma kwemfumba, ukomeleza ukwehla.
Ulwakhiwo lweziseko ezingundoqo: Ukuqinisekisa ukomelela nokuzinza kwezakhiwo.
I-Oilfileld kunye nobunjineli baselwandle:ukuqinisekisa uzinzo kunye nezibonelelo zokhuseleko.
Ubunjineli boluntu: Ukomeleza isiseko ukuqinisekisa uzinzo lwesakhiwo.
Ubunjineli bokukhuselwa kwendalo: isetyenziselwa ukulawulwa kwezikhukula, uhlaziyo lwendalo, kunye nezinye iiprojekthi zokukhusela indalo esingqongileyo.
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
